ACE BEST MACHINERY

CNC Machining Parts*Casting Parts*Sheet Metal
Parts*Stamping Parts*Stamping Molds.

IATF 16949 - ISO 9001

Manufacturing Supplier

Tel: 0086-574-87732891

Email: info@ace-machinery.com

What is metal stamping?

Stamping (also known as pressing) is the process of placing flat sheet metal in either blank or coil form into a stamping press where a tool and die surface forms the metal into a net shape. Stamping includes a variety of sheet-metal forming manufacturing processes, such as punching using a machine press or stamping press, blanking, embossing, bending, flanging, and coining. This could be a single stage operation where every stroke of the press produces the desired form on the sheet metal part, or could occur through a series of stages. The process is usually carried out on sheet metal, but can also be used on other materials, such as polystyrene. Progressive dies are commonly fed from a coil of steel, coil reel for unwinding of coil to a straightener to level the coil and then into a feeder which advances the material into the press and die at a predetermined feed length. Depending on part complexity, the number of stations in the die can be determined.

Bending – the material is deformed or bent along a straight line.
Flanging – the material is bent along a curved line.
Embossing – the material is stretched into a shallow depression. Used primarily for adding decorative patterns.
Blanking – a piece is cut out of a sheet of the material, usually to make a blank for further processing.
Coining – a pattern is compressed or squeezed into the material. Traditionally used to make coins.
Drawing – the surface area of a blank is stretched into an alternate shape via controlled material flow.
Stretching – the surface area of a blank is increased by tension, with no inward movement of the blank edge. Often used to make smooth auto body parts.
Ironing – the material is squeezed and reduced in thickness along a vertical wall. Used for beverage cans and ammunition cartridge cases.
Reducing/Necking – used to gradually reduce the diameter of the open end of a vessel or tube.
Curling – deforming material into a tubular profile. Door hinges are a common example.
Hemming – folding an edge over onto itself to add thickness. The edges of automobile doors are usually hemmed.
Piercing and cutting can also be performed in stamping presses. Progressive stamping is a combination of the above methods done with a set of dies in a row through which a strip of the material passes one step at a time.

PRODUCT CATEGORY

CONTACT US

If you would like to have a question then get in touch today, we are ready to assist 24/7.
We welcome your cooperation and we will develop with you.
 Factory-direct Connectivity Solutions.
 High quality, Competitive Price.
 Custom-tailored solutions.
 Problem-solving approach.

Recent News

CONTACT US NOW

If you would like to have a question then get in touch today, we are ready to assist 24/7.
We welcome your cooperation and we will develop with you.

 Factory-direct Connectivity Solutions.
 High quality, Competitive Price.
 Custom-tailored solutions.
 Problem-solving approach.